LIGHTWELL Solutions by location

Aluminium louvres for lightwells
daylight, heat release, rain protection.

A lightwell brings daylight into the core of a narrow townhouse and lets hot air escape. Sealed with a roof, the house is bright but stuffy; left open, rain falls straight in. Angled aluminium louvre blades keep a continuous gap for air to escape, let diffused light down and block most of the rain falling straight in.

Send your dimensions for a quotation
01

Fixed or operable — choose by how it will be used

  • Worker-Fixed uses a double frame and double blades, with fixed blades and no operation needed at height — the best fit for lightwells.
  • To close it fully in storms, choose an operable system, but plan where the crank handle or motor will go, as high positions are hard to reach. Louvre motor: 2,500,000 VND per set.
  • Lightwell spans are typically 1–3 m: under 1.7 m use Worker-Pro; 2–4 m use Worker-Max.
02

What to check before ordering

  • Measure the clear lightwell opening at three points; openings at height are often out of square.
  • Identify the main direction of driving rain to set the angle of the blades.
  • Check the supporting structure (beams, steel frame, perimeter walls) to choose how the frame is fixed.
  • Plan for drainage and cleaning: lightwells tend to collect leaves and dust, so they must be within reach for regular cleaning.
03

Pricing for lightwell openings

Ex-factory list prices, excluding VAT, delivery and installation. Openings under 0.9 m² are priced from the per-unit price list; from 0.9 m² to under 1 m² they are charged as 1 m²; from 1 m² upwards they are charged by actual area. If one side is under 700 mm and the other is over 1000 mm, the short side is charged as 700 mm.

  • Lightwell openings are usually over 1 m², so they are priced by actual area multiplied by quantity.
  • Worker-Fixed is 1,990,000 VND/m², with a 20-year product warranty — the longest of the four systems.
  • For an exact figure, enter width × height in the quotation calculator on the homepage.
Suitable systems

Choose a system by opening.

Price by dimensions
Fixed · Long-term durability

Worker-Fixed

Price from
1,990,000 VND/m²
Blade size
85 × 15 × 1 mm
Warranty
20 years on the product
Suitable locations
Diverse applications where the blades do not need to open or close
View the Fixed system
Large format · Façade architecture

Worker-Max

Price from
2,590,000 VND/m²
Blade size
140 × 20 × 1.1 mm
Warranty
5 years on the product
Suitable locations
Locations requiring a large span, seamless up to 3.5 m
View the Max system
Medium format · Water resistance first

Worker-Pro

Price from
2,390,000 VND/m²
Blade size
100 × 10 × 1 mm
Warranty
5 years on the product
Suitable locations
Openings under 1.7 m where protection against driving rain is needed
View the Pro system
Versatile · Budget-optimised

Worker-Smart

Price from
1,890,000 VND/m²
Blade size
85 × 15 × 1 mm
Warranty
3 years on the product
Suitable locations
Multiple locations; fits conveniently onto aluminium-glass systems
View the Smart system

High positions are rarely operated, so Worker-Fixed is the main choice; where opening and closing is needed, use an operable system with a motor.

FAQ

Frequently asked questions.

Does rain get in through lightwell aluminium louvres?

The blades block most rain falling straight down, but they are not completely sealed in rain with strong wind. Many projects add a glass roof above and use louvre blades below, giving both rain cover and ventilation.

Fixed or operable blades for a lightwell?

High positions are hard to reach, so fixed Worker-Fixed blades are the simplest option. If you want to close it fully in storms, choose an operable system and allow for a control motor (2,500,000 VND for the louvre motor).

Can large lightwells be covered?

Yes. Worker-Max uses a 140 × 20 × 1.1 mm blade with two internal structural ribs, intended for positions that need large spans of about 2–4 m.

How is a lightwell cleaned?

Maintain it every six months: wipe off dust with a damp cloth, lubricate the pivot joints on operable systems, and check and retighten the fixing screws as needed.